Samsung Galaxy Watch Does Not Switch On – How to Fix It

by

If your Samsung Galaxy Watch is not turning on, it could be due to battery issues, software glitches, or hardware malfunctions. This guide provides step-by-step solutions to fix the problem and power on your watch.

Check the Battery and Charging

Ensure the Watch is Charged
  • Place the watch on the original charger.
  • Wait at least 15 minutes before trying to turn it on.
  • If the battery was completely drained, it may take longer to respond.

Check for Charging Issues
  1. Try using a different power adapter and cable.
  2. Ensure the charging dock is clean and free of dust.
  3. Use another Samsung-compatible charger if available.

Force Restart the Watch

If the watch is unresponsive, a force restart may help.

Steps to Force Restart
  1. Press and hold the Home (Power) button for 10–15 seconds.
  2. Release the button when the Samsung logo appears.
  3. If it does not turn on, try pressing both Home + Back buttons together.

Try a Different Charging Method

If the watch does not charge, try wireless power-sharing with a Samsung phone:

  1. Open Wireless PowerShare on a compatible Samsung Galaxy phone.
  2. Place the watch on the back of the phone.
  3. Wait a few minutes and try turning it on again.

Check for Physical Damage
  • Inspect the screen and buttons for damage.
  • If the watch has been exposed to water, let it dry completely before attempting to power it on.

Boot into Recovery Mode

If the watch is stuck on a black screen, booting into Recovery Mode may help.

Steps to Enter Recovery Mode
  1. Press and hold the Power button until the Samsung logo appears.
  2. Quickly press the Power button multiple times until the Reboot Mode screen appears.
  3. Use the Power button to scroll and select Recovery Mode.
  4. Wait for the watch to restart.

Reset the Watch

If the watch turns on but remains stuck or unresponsive, a factory reset may be required.

Hard Reset via Buttons
  1. Power off the watch (or use Recovery Mode if it won’t turn on).
  2. Press and hold Power + Back buttons until the Samsung logo appears.
  3. Use the Power button to scroll and select Wipe Data/Factory Reset.
  4. Confirm and restart the watch.

If your Samsung Galaxy Watch still does not switch on, contact Samsung Support or visit an authorized service center for further assistance.