Resetting the Bluetooth on a JBL speaker clears all paired devices and helps fix connectivity problems like failed pairing, frequent disconnections, or not showing up in the Bluetooth list. Here’s how to reset the Bluetooth connection on most JBL speakers.
General Method to Reset Bluetooth on JBL Speakers
Step-by-Step Instructions (Most Models)
- Turn on the speaker
- Press the Power button to turn it on.
- Press and hold the reset buttons
- Press and hold Volume Up (+) and Play/Pause at the same time.
- Hold for about 10–15 seconds until the speaker turns off or restarts.
- Turn the speaker back on
- Press the Power button again.
- The speaker is now reset and ready to pair.
Alternative Reset Combinations by Model
Some models use different button combinations:
| Model | Reset Button Combo |
|---|---|
| JBL Flip (4, 5, 6) | Volume Up + Play/Pause |
| JBL Charge (3, 4, 5) | Volume Up + Play/Pause |
| JBL Xtreme (2, 3) | Volume Up + Bluetooth |
| JBL Boombox | Volume Up + Bluetooth |
| JBL Clip (2, 3, 4) | Volume Up + Play/Pause |
| JBL Pulse | Volume Up + Play/Pause |
| JBL PartyBox series | Volume Up + Play/Pause or dedicated Reset |
After Resetting
- The speaker will forget all paired Bluetooth devices.
- You’ll need to re-enter pairing mode by holding the Bluetooth button until the light blinks.
- Then go to your phone or device’s Bluetooth settings and pair the speaker again.
Tip: Reboot Your Device Too
If your phone or computer was previously paired, restart it before reconnecting to the reset speaker. This helps clear cached connections.
If the reset doesn’t resolve your issue, the problem may be hardware-related, and you should contact JBL Support for further help.